Lexorius\/ESP-Home-DTG-Clock: ESP Home Project – with MAX7219 Digit Display<\/a><\/p>\n—————
\nesphome:
\nname: picow-clock-ds1307
\nfriendly_name: PicoW-Clock-ds1307
\non_boot:
\nthen:
\n# read the RTC time once when the system boots
\nds1307.read_time:<\/p>\n
rp2040:
\nboard: rpipicow<\/p>\n
# Enable logging
\nlogger:<\/p>\n
# Enable Home Assistant API
\napi:
\nencryption:
\nkey: „<enc>“<\/p>\n
ota:
\n– platform: esphome
\npassword: „<ota>“<\/p>\n
wifi:
\nssid: !secret wifi_ssid
\npassword: !secret wifi_password<\/p>\n
# Enable fallback hotspot in case wifi connection fails
\nap:
\nssid: „Picow-Clock-Ds1307“
\npassword: „<recover>“<\/p>\n
i2c:
\nsda: 20
\nscl: 21
\nscan: true
\nid: mainbus<\/p>\n
spi:
\nclk_pin: GPIO02
\nmosi_pin: GPIO03<\/p>\n
#SPI0_SCK Pin 6
\n#SPI0_MOSI Pin 7
\n#SPI0_MISO Pin 4
\n#SPI1_SCK Pin 10
\n#SPI1_MOSI Pin 11
\n#SPI1_MISO Pin 8<\/p>\n
display:
\n– platform: max7219digit
\nupdate_interval: 1s
\ncs_pin: GPIO05
\nnum_chips: 12
\nscroll_speed: 0ms
\nintensity: 7
\nlambda: |
\nauto time = id(sntp_time).now();<\/p>\n
\/\/ it.printf(0,0,id(digit_font),“%s“, id(Scrolltext).state.c_str());
\nif (time.is_valid()) {
\nif (time.is_dst ){<\/p>\n
if ((int(time.second) % 2) == 0){
\nit.strftime(0, 0, id(digit_font), „%d %H%M B %b %y.“, id(sntp_time).now());
\n} else {
\nit.strftime(0, 0, id(digit_font), „%d %H%M B %b %y“, id(sntp_time).now());
\n}<\/p>\n
} else {<\/p>\n
if ((int(time.second) % 2) == 0){
\nit.strftime(0, 0, id(digit_font), „%d %H%M A %b %y.“, id(sntp_time).now());
\n} else {
\nit.strftime(0, 0, id(digit_font), „%d %H%M A %b %y“, id(sntp_time).now());
\n}<\/p>\n
}
\n} else {
\nif (id(wifisignal).has_state()) {
\nit.printf(0, 0, id(digit_font), „Getting Time from NTP“);
\n}
\nelse {
\nit.printf(0, 0, id(digit_font),“Connecting Wifi“);
\n}
\n}<\/p>\n
font:
\n– file: „fonts\/pixelmix.ttf“
\nid: digit_font
\nsize: 8<\/p>\n
sensor:<\/p>\n
– platform: wifi_signal
\nname: „WiFi Signal Sensor“
\nid: wifisignal
\nupdate_interval: 60s<\/p>\n
time:
\n– platform: sntp
\nid: sntp_time
\ntimezone: Europe\/Berlin
\nservers:
\n– 0.pool.ntp.org
\n– 1.pool.ntp.org
\n– 2.pool.ntp.org
\non_time_sync:
\nthen:
\n# … and update the RTC when the synchronization was successful
\nds1307.write_time:<\/p>\n
– platform: ds1307
\n# repeated synchronization is not necessary unless the external RTC
\n# is much more accurate than the internal clock
\nupdate_interval: never
\n# instead try to synchronize via network repeatedly …<\/p>\n<\/blockquote>\n
\n8. UF2 Datei von ESP Home auf den PicoW kopieren und PicoW neu starten.<\/p>\n
Fertig.<\/p>\n","protected":false},"excerpt":{"rendered":"
Neben Lesbaren und einfachen Uhrzeiten hat sich jemand die Nato Zeit oder DateTimeGroup ausgedacht. Das Format, welches\u00a0 z.b. f\u00fcr den 6.12.2024 12:34Uhr wie\u00a0 so aussieht: “ 061234ADec24″ wird auch im THW verwendet. Daraus wurde in den letzten Tagen nun folgendes Projekt: Machen wir mal eine schnelle Bauanleitung daf\u00fcr. Was man ben\u00f6tigt: Pico W (leider noch […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":{"0":"post-314","1":"post","2":"type-post","3":"status-publish","4":"format-standard","6":"category-allgemein","7":"czr-hentry"},"_links":{"self":[{"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/314","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=314"}],"version-history":[{"count":4,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/314\/revisions"}],"predecessor-version":[{"id":335,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/314\/revisions\/335"}],"wp:attachment":[{"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=314"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=314"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/kloppholz.de\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=314"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![](\"https:\/\/github.com\/Lexorius\/ESP-Home-DTG-Clock\/blob\/main\/IMG-20241205-WA0000.jpeg?raw=true\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_192808-169x300.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_192849-169x300.jpg\")
![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_193209-169x300.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_193756-169x300.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_194744-300x169.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_194752-300x169.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_194932-169x300.jpg\")
![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_195156-169x300.jpg\")
![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_195526-169x300.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_200152-300x169.jpg\")
![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_200155-300x169.jpg\")
<\/p>\n![\"\"](\"http:\/\/kloppholz.de\/wordpress\/wp-content\/uploads\/2024\/12\/20241206_200154-300x169.jpg\")
<\/p>\n